Anping County Xinlu Wire Mesh Products Co., Ltd.
Anping County Xinlu Wire Mesh Products Co., Ltd. wedge wire screen, water well screen pipe, wire wrapped screen pipe, v wire slot tube, stainless steel strainer pipe, rotary drum sceren, seive bend
Add to Cart
Anti-Corrosion Trapezoidal Wire Water Well Screen Pipe With Thread Joint Easy Installation
water well screen pipe, johnson well screeen, rod based wire wrapped screen, wedge wire screen, stainless steel strainer pipe, v wire slot tube, perfect roundness well screen pipe, dewatering well screen, stainless steel lateral screens, wedge wire filter candles, Rotary drum screens, strainer cylinder, sand control well screen, oil well screen, rod based continuous slot screens, header and hub laterals & hub radial laterals etc.
Xinlu factory designs and builds water well screens in a vast array of sizes, shapes and materials. Feiya group branch factory-Xinlu's wedge wire screens are generally made from stainless steel, galvanized steel. Slots as narrow as 0.1mm and up to a maximum of 15mm allow precise matching of the screen opening size to the materials to be filtered. These well screens are typically used in water wells, oil wells and geothermal wells. The maximum screen length can reach up to 6 m.
Bottom Line for the Water Well Screen Pipe
1. A well screen is a piece of pipe with slots around its length. Rigid construction, a maximum open area up to 60% and precise slot openings suit the wedge wire screen for use in fine and silty sand aquifers.
2. A wedge wire design reduces the risk of clogging and is easy to backwash.
3. Large screen areas increase the chance of clean water entering the well while still keeping impurities out. This means more water can easily enter the well, keeping pumping costs low. The water also undergoes less of a pressure drop, which reduces the energy consumption through the pumping process.
4. Water enters at a low speed, under a low pressure, which reduces erosion on the screen surface and improves the screen's service life.
5. For the given length, diameter and slot opening size, Feiya group branch factory-Xinlu's filter screens allow for a flow rate that is 3 times higher than the bridge slot screen, and 9 times that of a louvered well screen.
6. Customers can choose the slot opening size anywhere between 0.1 to 6mm, based on specific application requirements.
Applications for the Water Well Screen Pipe
Feiya group branch factory-Xinlu's wedge wire screen works well with deep well and submersible pumps. It is also commonly used in vertical wells, deviated wells, and directional wells.
| Size | Inside Diameter (ID) | Outside Diameter (OD) | Female Thread OD | ||||
| Inch | Mm | Inch | Mm | Inch | Mm | Inch | mm |
| 2 | 51 | 2 | 51 | 2 5/8 | 67 | 2 3/4 | 70 |
| 3 | 76 | 3 | 76 | 3 5/8 | 92 | 3 3/4 | 95 |
| 4 | 102 | 4 | 102 | 4 5/8 | 117 | 4 3/4 | 121 |
| 5 | 127 | 5 | 127 | 5 5/8 | 143 | 5 3/4 | 146 |
| 6 | 152 | 6 | 152 | 6 5/8 | 168 | 7 | 178 |
| 8 | 203 | 8 | 203 | 8 5/8 | 219 | 9 1/4 | 235 |
| 10 | 254 | 10 | 254 | 10 3/4 | 273 | 11 3/8 | 289 |
| 12 | 305 | 12 | 305 | 12 3/4 | 324 | 13 3/8 | 340 |
| 14 | 356 | 13 1/8 | 333 | 14 | 356 | ||
| 16 | 406 | 15 | 381 | 16 | 406 | ||
| 20 | 508 | 18 3/4 | 476 | 20 | 508 | ||
| PROFILE WIRE | ||||||||
| WIDTH(mm) | 1.50 | 1.50 | 2.30 | 2.30 | 1.80 | 3.00 | 3.70 | 3.30 |
| HEIGHT(mm) | 2.20 | 2.50 | 2.70 | 3.60 | 4.30 | 4.70 | 5.60 | 6.30 |
| SUPPORT ROD | ROUND | |||||
| WIDTH(mm) | 2.30 | 2.30 | 3.00 | 3.70 | 3.30 | Ø2.5--Ø5mm |
| HEIGHT(mm) | 2.70 | 3.60 | 4.70 | 5.60 | 6.30 | ---- |
FAQ
Q1. Can I have a sample order?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time?
A: 3-5 days for Sample preparing , 15-25 working days for mass production.
Q3. Do you have any MOQ limit for the order?
A: Low MOQ, 3pc for sample checking is available.
Q4. How do you ship the goods and how long does it take to arrive?
A: Airline, sea shipping and rail transportation are all optional.
Or ship by EMS, DHL, UPS, FedEx or TNT, it takes 5-7 days to arrive.
Q5. How to proceed an order?
A: Firstly let us know your need specification or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms and places deposit for formal order.
Fourthly We arrange the production.
Q6. Is it OK to print my logo on the product?
A: Yes. Please inform us formally before our production.
